MODEL 9000F FLUORIDE ANALYSER

Download PDF

ANTEK 9000F offers a cost-effective alternative to the common Wickbold method (oxy-hydrogen torch) of analysis, providing total fluoride determinations on gas, liquid, and solid samples safely within minutes instead of hours. It is far less expensive than ICP/MS; and, unlike other methods, the ANTEK 9000F is specific for fluoride without interference from other halides. The safe, non-hazardous ion specific detection method provides an analytical range from sub-ppm to percent levels.

• Specific for fluoride
• Sensitivity from sub-ppm to % levels
• Results in 5 to 15 minutes
• Non-hazardous operation
• Gas, LPG, liquid, and solid samples

MODEL 7050 NITRIC OXIDE DETECTOR

Download PDF

The 7050 permits fast, sensitive analysis of nitric oxide in gas and liquid samples. Its unique, patented nitric oxide transfer vessel frees analysts of time-consuming sparging with inert gas. The 7050 quantitates nitric oxide in gaseous samples in less than 30 seconds, while direct measurement of NO in liquid samples takes about one minute.

MODEL 745 NITRITE/NITRATE REDUCER

Download PDF

Our 745 Nitrate/Nitrite Reducer utilises vanadium (III) to rapidly reduce nitrite and nitrate to nitric oxide (NO). The resulting NO can then be detected and quantitated using ANTEK's Model 7050 Nitric Oxide Analyser or 9000 Series Nitrogen/Sulphur Analysers.

The 742 Data Handling Software Package enhances ease of operation of our 700 and 7000 Series Nitrogen/Sulphur Analysers by adding PC-based data acquisition, analysis, and storage.

• Monitors instrument operation and handles data management
• Real time display of sample progress
• User-defined reports
• Post-analysis reprocessing

Utilizing the same interface included with our 9000 Series Analysers, this user-friendly, menu-driven software plots calibration curves, performs statistical evaluations, and generates customized reports. Method characteristics can be changed following a sample run and reprocessed with any saved calibration.

Please Note: All ANTEK 9000 analysers include a computer with Windows based, custom-designed software. Data acquisition, analysis, and storage, as well as programming and control of the analyser and accessory instrumentation are easy using the user friendly, menu driven interface. Remote instrument operation and real-time analysis support are provided via a pre-configured modem.